Soundproof boxes for ASIC miners. A heavy acoustic cabinet that takes the scream out of your ASIC, from the Antminer S21 to the IceRiver KS3. No throttling, stable temperature and full uptime, right beside your desk.
96 dB → 35 dB same miner50 kg of mass against low hum5 kW max, with the double box260 miners fit, see the list
From vacuum cleaner to quiet library.
Dense walls suppress a wide frequency range: the high whistle of the fans, and the low hum below 1500 Hz that simple mufflers let through.
−61 dBsame miner, in the sealed box
96
Bare ASICmeasured, all day long
72
Box, front cover openabout a vacuum cleaner
60
Conversation
40
Quiet library
35
Sealed Miner Boxstand it beside your desk
30
Whisper
Miner levels measured by us; reference levels are typical values, in dB.
96 dBBare ASIC
35 dBSealed Miner Box
Switch to compare.
Mass outside. Foam inside.
Cold air inWarm air outThe door lifts out as you scroll in.
01 / 06
Cold in below. Hot out on top.
A miner shut in a box sounds like a recipe for overheating. Not in this one: the air path is split in two, so the ASIC only ever breathes cool room air.
01
Cool air in at floor levelThe intake sits low, where the room's air is coolest.
02
Straight into the fansA sealed cold zone under the miner feeds its fans directly. Nothing warm mixes in.
03
Heat rises out of the topThe hot side faces up, so warm air leaves on its own and is never drawn back in.
04
No throttling, full uptimeThe chips hold a stable temperature, so the miner never slows down.
Side panel removed so you can follow the air.
Its heat is yours to use.
Practically every watt a miner draws comes back out as heat. Fit a duct to the exhaust and send the warm air wherever your home needs it: a cold room, the hallway, or outside in summer.
Antminer S21 gives off 3.5 kW of heat: enough to warm about 50 m², a two-room flat.
Heat out equals power in. Area at 70 W per m², a typical heating need for an insulated home in a Central-European winter. Ask us about the duct adapter.
Large · Black
Noise Reduction Box for ASICs
Size 52 × 40 × 120 cm
Finish
Your ASIC
Regular price€580
Made to order in Prague. Building your box usually takes about a week, then it ships as usual: 1–3 business days in Europe.Made to order: about a week to build, then it ships.
Outer dimensions 52 × 40 × 120 cm · weight around 50 kg
Bare ASIC96 dB, all day long
Same ASIC, sealed box35 dB
01Exhaust built for optimal airflowHot air rises straight up and out through the vent in the top section. No pocket where it can get stuck, so heat never builds up and the miner runs at full efficiency.
0250 kg of soundproofing materialDense, heavy walls stop the low hum below 1500 Hz as well as the high whistle of the fans.
03Intake shaped for clean airflowIts size and shape give the miner a smooth, steady stream of cool air with no dead spots or turbulence, so the fans never have to spin up to compensate.
05Quiet, steady and coolBuilt for maximum soundproofing and vibration absorption, while the ASIC holds a stable temperature: no throttling, full uptime.
06Vibration pad + swappable kitThe ASIC sits on a damping pad. Change your miner model and keep the box. Need a different pad? We make custom ones on request.
04No mineral woolEco-friendly lining with no harmful emissions and no odours.
Cold air in
Warm air out
Drag with your mouse to rotate the boxDrag to turn the box
Miner Boxes
